Heel Angle Bar Graph - Velocitek Prostart Manual

Modes 14

Heel Angle Bar Graph

In Race Mode, with magnetic heading selected as the direction output, the ProStart detects the heel
angle of the vessel allowing the sailor to balance the power and keep the boat on her lines. Each bar
segment represents 2.5° of heel.
To zero out the heel angle, press RESET when the ProStart is in Race Mode.
When COG is selected as the direction output, the heel angle feature is disabled.
Heel angle is also recorded in the ProStart's data storage. Heel to starboard is shown as positive degrees.
Heel to port is shown as negative degrees.
Each segment represents 2.5° of heel
-12.5°
0° 12.5°