Setting Compass Declination And Bow Offset - Velocitek Prostart Manual

Setting Compass Declination and Bow Offset

Once you have entered user setup by holding
Declination.
To set the bow offset you must first go through the declination menu then press
offset menu as illustrated below:
- 1
Press GUN to Set Declination
and Enter Bow Offset Menu
- 0.5
Press
and Enter Heading / COG
Menu
GUN to Set Bow Offset
Configuration sequence continued on next page.
RESET for 3 seconds, your first menu is Magnetic
Hold RESET to Enter
Declination Menu
Press to Exit
+ 1
Press RESET to
Exit
Bow Offset Menu
Adjust bow offset by pressing
+ 0.5
Bow offset can be adjusted increments of
0.5 meters.
Set the bow offset and enter Heading /
COG menu by pressing GUN. Exit menu
without setting bow offset by pressing
RESET.
Configuration
GUN to get to the bow
Declination Menu
Adjust declination by pressing
PIN. Declination can be adjusted by
increments of 1 degree.
Set the declination and enter bow offset
menu by pressing GUN. Exit menu
without setting declination by pressing
RESET.
21
RC and
RC and PIN.