Velocitek Prostart Manual page 30

Maintenance
To ensure your ProStart's enclosure remains watertight and the electronics are not destroyed by
corrosion, please take the following precautions:

Always replace the USB port cap securely before exposing the ProStart to the marine
environment.

Dry case with a towel before opening the USB port cap.

Wipe away sand or debris on the gasket before closing the USB port cap.

Once the cap is open wipe away any loose water droplets.

If you ever see signs that water is leaking inside the enclosure please contact Velocitek Support
immediately at (866)-498-6737 or
repaired and made watertight again.
support@velocitek.com
Maintenance
to arrange to have your device
29