Using The Backlight; Show Off Your Maximum Speeds - Velocitek Prostart Manual

When the ProStart is first turned on, it must download information from GPS satellites before it can
acquire a GPS signal.
The satellite acquisition process can take up to 5 minutes.

Using the Backlight

The ProStart features a white or red LED backlight.
With the ProStart powered on, press
If your ProStart has a low battery, the backlight will automatically turn off to reduce power consumption
and extend the runtime of your ProStart.

Show Off Your Maximum Speeds

Everyone likes to know how fast you went. The ProStart max speed recall pulls your best speeds up with
the click of a button.
Hold MAX to display max speeds
Display both your instantaneous and 10 second average maximum speed by holding MAX. The maximum
speeds are stored in non-volatile flash memory and are stored until overwritten with higher speeds or
the user resets the maximum speeds.
The ProStart's max speed Instantaneous Max is a two second average and the Ten Second Average Max
is self-explanatory. These max speeds are calculated from Doppler speeds.
The maximum speeds are not limited by track storage capacity.
POWER / LIGHT to cycle the backlight between white, off, and red.
Press RESET while max speeds are
displayed to reset the max speeds
Operation 16
Maximum 10
second Average
Speed
Maximum
Instantaneous
Speed