Setting The Ends; How To Use Time And Distance - Velocitek Prostart Manual

Setting the Ends

The start line ends can be set anywhere along the start line. We recommend sighting both the pin and
the race committee ends from outside the line. Another method is to get close to the ends just inside the
line and set them. The ends can be set at any time and in any order.
1. Approach the line slowly from below with a consistent speed and heading.
2. Press the PIN

Press the

Press the
We recommend setting the ends of the line for the start of each race, regardless of whether the line has
moved.

How to use Time and Distance

Balancing time and distance to hit the line at the gun, close hauled and at full speed is the stuff good
starts are made of.
To accomplish this goal, many top sailors establish a ratio of time to distance or distance to time.
Conveniently in boats in the 20-25 foot range, the ratio is often 1:1. Your ratio(s) may vary.
A timed run at the line is a good way to figure out your time and distance ratio.
/ RC button when your bow is on the line.
RC button to set the right end of the line
PIN button to set the left end of the line
Understanding 'Distance to Line' 26