Preface; Introduction; What's In The Box; Tools, Cabling And Equipment Required - Quail Digital Pro9 Installation Manual

Preface

Quail Digital Pro9 is a wireless headset system designed to facilitate order-taking in the drive-thru lane
of a quick service restaurant. Team members wearing wireless headsets communicate with customers
through a remote order point containing a microphone and speaker which activate on arrival of
their vehicle at the post. Headset users can communicate with the customers, and on a private
channel, with each other. The system uses the internationally approved DECT telephony standard and
specification for transmission. Page 27 of this manual lists the components parts of the system. The
sale, installation and support of the product is undertaken by organisations and individuals known to
or appointed by Quail Digital.

Introduction

This manual is aimed at the technician level reader who is expected to be familiar with all safety
precautions relevant to the use of electrical equipment.
The Pro9 system differs from other drive-thru headset systems as it is digital all the way from the
order point to the headset. This improves audio quality, clarity and acts as a shield from external
interference.
If you are unfamiliar with Quail Digital products, you are encouraged to watch our training films
on this product before you start the installation, and to follow the installation steps in the order
presented in this guide.
Quail Digital uses direct burial Cat5 cable for the link between the order post and the base station
and always recommends that solution. Proprietary or recommended cables used by other headset
suppliers have been tested with Pro9 and can be used if already in the ground (subject to testing).

What's in the box

•
Pro9 Headset (Q-P9HS)
•
Pro9 Base Station (Q-P9BS)
•
Pro9 Charger (Q-P9CH)
•
Pro9 Drive-Thru Module (Q-P9DTM)
•
Pro9 Speaker & enclosure (Q-P9SPK)
•
Pro9 Microphone & enclosure (Q-P9MIC)
•
Acoustic foam (Q-P9FOAM)

Tools, cabling and equipment required

•
Small terminal flat blade screwdriver
•
Cordless drill
•
Tape measure
•
Spirit level
•
Marker pen
•
Cable strippers/diagonal side cutters
•
Cat5 cable crimping tool
(optional items)
•
Pro9 Repeater (Q-P9RP)
•
Pro9 accessory kit
-
Junction Box (Q-P9JB)
-
Auxiliary Connection Box (Q-P9ACB)
-
Network Termination Box (Q-P9NTB)
•
Cat5 patch lead
•
Cat5 cable tester
•
Direct burial specification Cat5 cable
•
RJ45 connectors (up to 4)
•
Multimeter
•
Stepladder
•
Laptop or phone for setup
page 3