1. Manuals
  2. Brands
  3. Quail Digital Manuals
  4. Headsets
  5. Pro10
  6. Installation manual

Quail Digital Pro10 Installation Manual

Headset system
Hide thumbs Also See for Pro10:
Table of Contents

Advertisement

Quick Links

Pro10
Headset System
Installation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro10 and is the answer not in the manual?

Questions and answers

Related Manuals for Quail Digital Pro10

Summary of Contents for Quail Digital Pro10

  • Page 1 Pro10 Headset System Installation Manual...

  • Page 2: Table Of Contents

    This guide specifies how the Pro10 headset system should be installed and commissioned. The LEDs on the base, registration point and headset use a sequence of colours and pulses to indicate the status of the system and the item, which are explained in this guide.

  • Page 3: Pre-Installation Procedure

    Pre-Installation Procedure Tools required to install Pro10 system: • • Phillips screwdriver Category 5/6/7 network cable • • drill with 1/8” masonry bit RJ45 crimp tool • • pencil cable stripper • • tape measure network cable tester • 1m patch cable...
  • Page 4 • Always locate your base stations so that they have, as much as possible, clear line of sight in the area you want to cover. Any solid wall, doorway, fridge, plant room area or mezzanine floor in immediate proximity in front of the base station will reduce range. •...

  • Page 5: Step 4 - Conducting Your Range Test

    Step 4 - Conducting your range test To conduct your range test, you should temporarily locate your first base station in the optimal position you think is correct for delivering maximum range. Then, temporarily connect the registration point to the base station with a Cat 5 patch cable from the base to the registration point.

  • Page 6: Installation Procedure

    Installation Procedure Step 6 - Installing base stations and registration point Once you’re confident that the bases are well sited, you should start your installation. Use the cardboard templates provided in the base & the registration point boxes to mark the wall with the correct fixing position.

  • Page 7: Step 7 - Connecting Base Stations And Registration Point

    Step 7 - Connecting base stations and registration point Daisy chain base stations together with Cat5 network cables (figure 3). The initial base station will have a network cable connected to the ‘network out’ RJ45 socket and the last in line will only have a connection on its ‘network in’...

  • Page 8: Step 9 - Setting Up The Charger

    Step 9 - Setting up the charger The Q-P10CH charger(s) are likely to be located in the staff room, manager’s office or other back- office area always ensuring that the headsets remain in good range of a base station. The charger(s) can be wall mounted on a shelf (Q-P10SHELF).

  • Page 9: Step 11 - Testing The Installation

    Note: 1. If you present a headset but the registration point doesn’t start to fast-flash GREEN it means that the headset is already registered to that system, so no further action needed on that headset. 2. If the registration point LED fast-flashes GREEN and then turns solid RED, it means that there’s a problem initialising the headset, put it aside and try again.

  • Page 10: Appendix A - Headset Battery Fitting

    Appendix A - Headset battery fitting Headsets should always be placed in the charger when not in use. The battery should not be removed from the headset except when being replaced. Battery fitting and removal 1. The headset will ship without the battery inserted.

  • Page 11: Appendix B - Headset Functionality & System Troubleshooting

    Appendix B – Headset functionality and system troubleshooting Headset audio Status Next steps Bloop-bleep Call drop Either you’ve moved out of range of base (move towards it). Or base has no power, check LEDs on front of base. If LEDs out or AMBER, call Tech support.

  • Page 12: Appendix C - Pro10 Products And Codes

    Appendix C - Pro10 products and codes Pro10 Headset Pro10 Base Station Pro10 Registration Point Q-P10HS Q-P10BS Q-P10RP Pro10 Charger Pro10 Charger Shelf Pro10 Headband Q-P10CH Q-P10SHELF Q-P10HB Pro10 Neckband Pro10 Battery Q-P10NB Q-P10BAT Quail Digital 92 Lots Road London SW10 0QD United Kingdom www.quaildigital.com...

Table of Contents

Save PDF