Mitsubishi Electric PUHY-P250YNW-A Service Handbook page 66

[3-6 Procedure of Separating the Indoor Unit ]
<Model 250>
<Model 500>
Linear expansion valve wiring
Clamp
Remote controller wiring
BS_03_C
Connect the wire from the lamp assy.
No. 1
No. 2
[Fig.2]
Connect the wire from the lamp assy.
Bend the wire once, and fix the wire.
(the wire from the lamp assy.)
Fix the wire from the fan motor.
Clamp
Thermistor wiring
Float switch wiring
Lamp wiring
17
chapter 3 -