Table of Contents
Advertisement
4. The L100's front display now shows two options: Enable PinPad, and Enable CR (in this case, CR
means "card reader"). Use the # and * keys to scroll up or down. Select Enable CR and press
Enter.
5. Setup is now complete. Execute the Start EMV Transaction command in the USDK Demo, or start
a transaction from your own software, and then insert a PIN debit card. After the prompt for PIN
comes up, the unit should display this:
Note: The test card must be a PIN-capable EMV card. We recommend using the appropriate test
card from a deck of test cards.
ID TECH VP5300M User Manual
Page | 31
Advertisement
Table of Contents
