BRASSELER USA NL4500 Operation Manual page 6

3. Setting of Air & Water Supply Pressure
Measure the supply pressure at the handpiece / hose connection point and
set the pressure to the value specified on the specification table. (Fig. 1)
For Multi Gauge information refer to Option Parts List.
Warning
• Do not exceed the optimum pressure specified on the specification table.
Caution
• Do not use air contaminated by dust, moisture and oil.
Refer to Operation Manuals of coupling and hose before connecting the handpiece.
Chip Air Pressure
Exhaust
Water Pressure
Air Pressure
Handpiece
Drive Air
Pressure
Fig. 1