BRASSELER USA NL4500 Operation Manual page 15

7-5 Lubrication NL4500
NSK PANA SPRAY Plus or other approved lubricant.
Apply NSK PANA SPRAY Plus every time after each use and/or before autoclaving.
1) Remove the bur from the handpiece.
2) Insert the Spray Nozzle into the Spray Port nozzle on the can.
3) Insert the Spray Nozzle in rear of the handpiece. Hold the handpiece and
spray for approximately 2-3 seconds. Apply lubricant until it expels from the
handpiece head for at least 2 seconds. (Fig. 8)
Caution
• When applying spray be sure to hold the handpiece firmly to prevent the
handpiece from slipping out of the hand due to the spray pressure.
• Hold the spray can upright.
Spray Nozzle
Handpiece PANA SPRAY Plus
Fig. 8