Table of Contents
Advertisement
6. Pre Check
Check that the Head Cap is firmly tightened. Also check for handpiece vibration, noise and overheating. If any
abnormalities are found do not use the handpiece and contact Brasseler USA.
7. Maintenance
After each patient maintain the product as follows. Lack of maintenance could
cause premature failure or overheating of the handpiece.
7-1 To Insert the Bur
After the treatment of each patient, clean the Clean Head.
1) Remove dirt and debris from the Clean Head Holes with the cleaning
wire and brush (supplied as an accessory for the handpiece). (Fig. 4)
2) Half fill a cup with clean water.
Clean Head Hole
Fig. 4
Advertisement
Table of Contents
