Settings And Operation - RCF BM 3003 User Manual

TURNING THE SYSTEM ON
ES 3323 settings before turning the system on (read the respective
user manual):
- Set both the dip-switches 3 and 4 of the inputs (2 and/or 3) for BM 3003
paging to OFF (LINE mode).
- Set the dip-switches 5 (for the input 2) and 6 (for the input 3) of the
'PRESET' group (SMART function) to OFF.
After connecting the paging microphone and turning the ES 3323 amplifier
on, verify that (with no paging in progress) the ON / BUSY LED
ing green.
NO PAGING IN PROGRESS
This indication confirms that the paging microphone is properly supplied and
the line in not engaged (therefore it is possible to page).
ZONE SELECTION
- Press and release one or more of the ZONE A, B, C buttons
zones to be paged (press again to cancel).
- When a zone is selected, its respective LED
SELECTED ZONE
notes:
- a
t the end of an announcement
(
pressed agaIn or the system Is turned off
- t
he zone selectIon Is possIble only If no pagIng In progress
5
(talK
button Is
8
1
ON / BUSY LED
2
2
ZONE LED : green
,
the zone selectIon Is held untIl zone buttons are
).
off).

SETTINGS AND OPERATION

1
is indicat-
: green
3
to select the
is indicating green.
TURNING THE SYSTEM ON
ZONE SELECTION