INDEX INDICE ENGLISH SAFETY PRECAUTIONS DESCRIPTION REAR PANEL WIRING AND CONNECTIONS SPECIFICATIONS ITALIANO AVVERTENZE PER LA SICUREZZA DESCRIZIONE PANNELLO POSTERIORE CABLAGGIO E COLLEGAMENTI UTILIZZO DATI TECNICI...
It has a single push-button with a LED, the zone to be paged can be set by using the DXT configuration software for PC. Up to 31 BM 7601 paging microphones can be linked to a DXT 7000EN ‘System Bus’ (or up to 8 linked to a ‘Local Bus’) through CAT5 / CAT6 cable.
REAR PANEL LEVEL SETUP SYSTEM/LOCAL BUS DIP-SWITCHES Dip-switches 1 ÷ 5: digital address setting DIP-SWITCH DIP-SWITCH ADDRESS ADDRESS The digital address must be unique for each unit linked to a bus and be the same assigned during the system configuration. Dip-switch 6: not in use (OFF);...
Trimmer to adjust the audio output level (a tool is needed). Note: the common audio level of all connected paging microphones is set by using the configuration software for PC. The BM 7601 trimmer can be used to adjust the microphone level when compared to other units in the system.
The BM 7601 paging microphone can be used for announcements to a single zone (set in the configuration software). TALK Push the TALK push-button briefly to start paging. Initially, the TALK LED blinks slowly, indicating the chime play before the announcement (please wait for a few seconds).
PRESTAZIONI ELEVATE. DESCRIZIONE BM 7601 è una base microfonica (con capsula ad elettrete) per annunci verso una singola zona è progettata per l’uso nel sistema RCF DXT 7000EN. E’ dotata di un solo tasto con LED di segnalazione. La zona per gli annunci può...
PANNELLO POSTERIORE LEVEL SETUP SYSTEM/LOCAL BUS DIP-SWITCHES (microinterruttori) Dip-switches 1 ÷ 5: impostazione dell’indirizzo digitale DIP-SWITCH DIP-SWITCH INDIRIZZO INDIRIZZO L’indirizzo digitale deve essere unico per ciascuna unità collegata ad un bus e deve essere lo stesso assegnato durante la configurazione del sistema. Dip-switch 6: non in uso (OFF);...
CABLAGGIO E COLLEGAMENTI Le basi microfoniche BM 7601 sono per solo uso interno è possono essere collegate sia al “System Bus” sia al “Local Bus” (tramite cavo CAT5 or CAT6) del sistema DXT 7000EN; è fortemente raccomandato l’uso di una rete dedicata.
UTILIZZO La base microfonica BM 7601 può essere usata per effettuare annunci verso una singola zona (impostata nel software di configurazione). TALK Premere il tasto TALK brevemente per attivare la base microfonica. Inizialmente, il LED TALK lampeggia lentamente, indicando la riproduzione del tono di preavviso prima dell’annuncio (attendere alcuni secondi).