Installing The Plenum On The Rack When Router Is Installed On The Rack - Cisco NCS 560-4 Hardware Installation Manual

Installing the Plenum on the Rack When Router is Installed on the Rack

Installing the Plenum on the Rack When Router is Installed on the Rack
This procedure talks about installing the plenum when the router is already installed on the rack.
Procedure
Step 1 Identify the type of rack (19-inch, 21-inch, or 23-inch) on which the router is already installed.
Step 2
Use the assembled plenum as as shown in the figure below.
Step 3 Use the appropriate bracket for the rack and attach the brackets.
Cisco NCS 560-4 Router Hardware Installation Guide
52
Installing the Cisco NCS 560-4 Router