Fiber-Optic Specifications; Alarm Conditions; Led Summary - Cisco NCS 560-4 Hardware Installation Manual

Fiber-Optic Specifications

Note The USB flash/MEM port +5VDC is output. We provide power for USB flash/MEM, and it operates as a
USB host device.
Fiber-Optic Specifications
The specification for optical fiber transmission defines two types of fiber: single-mode and multimode. Within
the single-mode category, three transmission types are defined: short reach, intermediate reach, and long
reach. Within the multimode category, only short reach is available. For information about optical SFP modules,
see the documentation for the SFP module at
http://www.cisco.com/en/US/partner/products/hw/modules/ps5455/prod_installation_guides_list.html.

Alarm Conditions

The table below summarizes the meaning of alarm conditions on the router.
Table 23: Alarm Condition Summary
Alarm
Type
Critical
Major
Info

LED Summary

The following sections describe the meanings of the LEDs on the router.
Cisco NCS 560-4 Router Hardware Installation Guide
112
Alarm Meaning
RSP OIR
Power supply OIR
Port in down state
Environmental sensor threshold exceeded (voltage, temperature)
IM OIR
IM crash
Standby RSP in ROMmon mode
RSP removed
RSP failure
Port administratively shut down
Pinout and LED Details