Vision Fitness X6600HRT Assembly Manual page 6

2
STEP
2
STEP
6
BLUE BAG
• Place a wavy washer (M20) on the
axle located under the foot plate of
the right lower link arm.
• Slide the axle of the lower link arm
into the bracket located on the top of
the right pedal arm. Secure the lower
link arm to the pedal arm by attaching
the pedal support bracket and screw
(M8x20L) to the end of the axle.
Secure the outside holes in the bracket
to the footplate with two sockethead
capscrews (M8x10L). Tighten screws
with the 5mm T-handled wrench.
• Repeat the same steps on the left side.
Pedal Arm
Lower Link Arm