Vision Fitness X6600HRT Assembly Manual page 5

ORANGE BAG
1
STEP
• Place the console mast boot on the
end of the console mast.
• Connect the wire tie that exits the
bottom of the console mast to the wire
harness that sits in the bracket at the top
of the frame. Pull the wire tie and wire
harness up through the console mast
while at the same time inserting the
Console Mast
console mast into the frame bracket.
• Secure the console mast to the frame
with two capscrews (M10 x 70L).
Tighten with the 8mm L-shaped wrench.
• Stabilize the console mast by inserting
the socket head screw (M8x80L) to the
front of the bracket. Tighten with the
10mm L-shaped wrench.
• Slide the console mast boot down
the console mast and snap it in place
1
STEP
so it integrates with the side covers.
Bracket
Console Mast
Boot
5