Connector Panel - Sony MSU-900 Operation Manual

When both the red and green tally signals are
simultaneously sent, the left half of the background lights
in red and the right half lights in green.
wa Iris control block
a EXT indicator
EXT
a EXT (lens extender) indicator
Lights when the lens extender is used.
b IRIS control and display window
When the AUTO button is not lit, you can adjust the iris
manually by turning the control. The adjustment value is
displayed in f numbers on the display.

Connector Panel

MSU-900
56
Locations and Functions of Parts
b IRIS control and display window
c AUTO button
AUTO
IRIS
1 POWER switch
2 AC IN connector
-AC IN
POWER
I
O
When the AUTO button is lit, the reference value for
automatic iris adjustment can be set in a range of ±2f with
this control.
When the iris is closed, "CL" is displayed in the window.
c AUTO button
Press and light the button to automatically adjust the iris
according to the amount of input light (Auto Iris).
When the button is lit, the reference value for automatic
iris adjustment can be set in a range of ±2f with the IRIS
control.
If you press the button when lit, it goes dark and manual
iris adjustment is enabled.
Note
If the subject being used as the reference for automatic
adjustment is lost while operating a camera with the skin
tone auto iris function, the skin tone auto iris stops
functioning, and the iris value at that time is maintained.
The AUTO button then flashes. In this condition, not only
is the iris not automatically adjusted but also it cannot be
changed manually. When you wish to change the iris, turn
Auto Iris off.
If Auto Iris is kept ON, the skin tone auto iris will start
functioning when the subject for reference is resumed.
For details on skin tone auto iris, refer to the system
manual.
3 CCU/CNU REMOTE connector
4 AUX REMOTE connector
REMOTE
CCU/CNU AUX
I/O PORT
5 Ethernet connector
6 I/O PORT connector