Sony MSU-900 Operation Manual page 52

c STORE button
To store a scene file, first press this button so that the
button starts flashing, then press the SCENE FILES button
of the desired number. When file registration is completed,
the STORE button goes dark.
To cancel the registration, press the flashing button again
before pressing the SCENE FILES button. The STORE
button goes dark.
qs Control block/Display window block
(Display only for the MSU-950. See page 52.)
MSU-900
a ON button
b SLS/SHUTTER/ECS indicators
ON
SLS SHUTTER ECS
1
ECS/SHUTTER
d ECS frequency/Shutter
speed/SLS frame select
buttons and display window
c Fraction indicator
a ON button
Turns on and off the SLS function, the shutter function, or
the ECS function of the camera.
The function is ON when this button is lit.
b SLS (Slow Shutter)/SHUTTER/ECS (Extended
Clear Scan) indicators
The indicator of the selected function lights. The function
selection is made by menu operation.
SLS: Lights in Slow Shutter mode.
SHUTTER: Lights in Shutter mode.
ECS: Lights in ECS (Extended Clear Scan) mode.
c Fraction indicator
Lights to indicate the denominator, such as that of the
shutter speed.
The indicator lights when the selected value is less than 1S
in Slow Shutter mode.
d ECS frequency/Shutter speed/SLS frame select
buttons and display window
In ECS mode (when the ECS indicator is lit): The
selected ECS frequency is displayed in the window.
The frequency increases when the v (up) button is
pressed and decreases when the V (down) button is
pressed. It continuously changes when either button is
held down.
52
Locations and Functions of Parts
GAMMA MASTER GAIN
f MASTER GAIN
select buttons and
display window
e GAMMA select buttons
and display window
In Shutter mode (when the SHUTTER indicator is lit):
The fraction indicator lights and the denominator of the
selected step shutter speed is displayed in the window.
The speed increases when the v (up) button is pressed
and decreases when the V (down) button is pressed. It
continuously changes when either button is held down.
In Slow Shutter mode (when the SLS indicator is lit):
The number of accumulated frames is displayed in the
window. The number increases when the v (up) button
is pressed and decreases when the V (down) button is
pressed. It continuously changes when either button is
held down.
e GAMMA select buttons and display window
Select the step gamma. The selected value is displayed in
the window.
The gamma value decreases when the v (up) button is
pressed and increases when the V (down) button is
pressed. It continuously changes when either button is held
down.
Note
The lower the value, the higher the gamma effect.
f MASTER GAIN select buttons and display window
Select the appropriate video gain according to the
illumination of the subject to be shot. The selected value
(dB) is displayed in the window.
The gain value increases when the v (up) button is pressed
and decreases when the V (down) button is pressed. It
continuously changes when either button is held down.
MSU-950
c GAMMA display window
b ECS frequency/Shutter
speed/Slow shutter
speed display window
a Fraction
indicator
ECS/SHUTTER GAMMA
a Fraction indicator
Lights to indicate the denominator, such as that of the
shutter speed.
The indicator lights when the selected value is less than 1S
in Slow Shutter mode.
b ECS frequency/Shutter speed/Slow shutter speed
display window
The currently selected ECS frequency, step shutter speed
or slow shutter frame is displayed in the window.
Switching the mode (ECS mode (Extended Clear Scan)/
Shutter mode/Slow Shutter mode), or setting the ECS
frequency, shutter speed, or slow shutter frame is made
using the Function menu.
When both ECS and Shutter are off, "oFF" is displayed.
d MASTER GAIN display
window
e Filter display
window
MASTER ND CC
GAIN FILTER