Installation - WE-EF ETC310-FS LED Installation And Maintenance Instructions Manual

Installation

The product must be installed and maintained by a
suitably qualifi ed person in compliance with the latest
applicable regulations and relevant legislation.
Ensure the luminaire frame and lens are clear of dirt
and debris.
Claims based on defects attributable to improper
installation, application, operation and/or any modifi -
cation carried out by the purchaser or third parties,
and the consequences thereof, are excluded.
Minimum Distance
ETC310-FS, ETC319-FS, EVC310-FS, EVC319-FS:
No minimum distance.
Installation Methods
Attention: The luminaire is factory-sealed and does
not need to be opened during installation.
For proper installation, use the supplied installation
blockout.
Ensure that proper drainage is provided for the shown
installation methods:
In landscape areas, sand with gravel base (Fig. I).
In paved areas, concrete with gravel base (Fig. II).
Fig. I
Fig. II
Phase One
Blockout Installation Procedure
(during earth or masonry work)
1) Ensure a suitable recess is provided to accommo-
date installation blockout/mounting ring assembly
B/M.
2) Set installation blockout/mounting ring assembly
B/M in position and ensure that:
a) Arrow R on mounting ring M is pointed towards
the object to be illuminated (wall, tree, column).
b) Mounting ring M is fl ush with surface F. If the
fl oor will be tiled or paved afterwards, leave an
appropriate gap.
c) Mains supply cable(s) O is of suffi cient length to
connect sealable junction box J with cable E from
luminaire.
3) During ongoing earth and/or masonry works, do
not remove stickers on fi xing thread holes D.
Ensure that installation blockout/mounting ring
assembly B/M is not damaged and has maintained
its original shape.
3