Advertisement
Installation
The product must be installed and maintained by a
building/construction and/or electrical regulations and
relevant legislation.
Warning:
installing and connecting the luminaire.
Notice:
than the original manufacturer, then the warranty will
no longer be valid and shall become the full respon-
sibility of the modifying person/organisation. Claims
based on defects attributable to improper installation
and/or application, and the consequences thereof, are
excluded.
Installation Methods
Attention: The luminaire is factory-sealed and does
not need to be opened during installation.
For proper installation, use the supplied installation
blockout.
Ensure that proper drainage is provided for
the shown installation methods:
In landscape/paved areas, sand or concrete with
gravel base (Fig. I).
With fully concreted installation, drainage piping
must be provided (Fig. II).
Fig. I
Fig. II
3
Advertisement
