Page 1
WE-EF LEUCHTEN Installation and Maintenance Instructions Inground Luminaire ETC320-FS LED EVC320-FS LED INSTALLER HOTLINE +61 458 933399 7am – 7pm AEST This product is factory-sealed. Do not open during installation Do not handle the luminaire by holding the cable end! Refer to the instructions contained in this document for details.
Page 2
Inground Luminaire ETC320-FS EVC320-FS IP67, Class I, ta = 25 C...
Page 3
Apart from cleaning the outside of the luminaire, no special maintenance is necessary. Do not handle the luminaire by holding the cable end! Doing so can damage the supply cable. Damaged mains supply cable: Contact your authorised WE-EF agent for replacement.
Installation Installation Methods The product must be installed and maintained by a Important: The luminaire is factory-sealed and does suitably qualified person in compliance with the latest not need to be opened during installation. applicable regulations and relevant legislation. Ensure that proper drainage is provided for the shown When selecting the correct location for the luminaire, installation methods.
Page 5
Phase One Phase Two Blockout Installation Procedure Luminaire Installation and Electrical Connection (during earth or masonry work) 4) Switch off mains electrical supply. 1) A suitable recess to be provided to accommodate 5) Check that rating shown on luminaire label con- installation blockout/mounting ring assembly B/M.
Need help?
Do you have a question about the ETC320-FS LED and is the answer not in the manual?
Questions and answers