Related Manuals for Zodiac Alpha iQ
Summary of Contents for Zodiac Alpha iQ
- Page 1 ALPHA™ iQ Installation and user manual - English Electric cleaner Original instructions More documents on: www.zodiac.com H0655700.C - 2021/03 - EC1102A...
- Page 3 WARNINGS • Before handling the appliance, it is vital that you read this installation and user manual, as well as the "Warranties" booklet delivered with the appliance. Failure to do so may result in material damage or serious or fatal injury and will void the warranty.
- Page 4 WARNINGS ASSOCIATED WITH ELECTRICAL APPLIANCES • The power supply to the appliance must be protected by a dedicated 30 mA Residual Current Device (RCD), complying with the standards and regulations in force in the country in which it is installed. •...
-
Page 5: Table Of Contents
CONTENTS ❶ Information before use 1.1 I Package contents 1.2 I Technical specifications and parts list 1.3 I Operating principle 1.4 I Pool preparation ❷ Use 2.1 I Immersing the cleaner in the pool 2.2 I Electricity supply connection 2.3 I Control box functions 2.4 I Starting a cleaning cycle 2.5 I Meaning of the sensor LED (depending on the model) 2.6 I Removing the cleaner from the water... -
Page 6: ❶ Information Before Use
❶ Information before use 1.1 I Package contents RA 63 - - iQ RA 68 - - iQ RA 65 - - iQ Alpha 63 iQ Bio RA 69 - - iQ RA 67- - iQ Cleaner + floating cable Control box Caddy kit Very fine debris single filter (60µ) -
Page 7: I Technical Specifications And Parts List
1.2 I Technical specifications and parts list 1.2.1 Technical specifications RA 63 - - iQ RA 67 - - iQ RA 65 - - iQ RA 69 - - iQ RA 68 - - iQ Alpha 63 iQ Bio 220 - 240 VAC, 50/60Hz, Class II* Control box power supply Cleaner power supply voltage 30 VDC... -
Page 8: I Operating Principle
1.3 I Operating principle The cleaner is separate from the filtration system and can function independently. It just simply needs to be connected to the mains power supply. It finds the best route to move around and clean the areas of the pool for which it has been designed (depending on the model: bottom, walls, water line). -
Page 9: ❷ Use
❷ Use 2.1 I Immersing the cleaner in the pool • Roll out the full length of the cable alongside the pool to avoid the cable becoming entangled during immersion (see image • Position yourself halfway along the length of the pool before immersing the cleaner (see image ). -
Page 10: I Electricity Supply Connection
2.2 I Electricity supply connection In order to avoid any risk of electrocution, fire or serious injury, please follow the instructions below: • Use of an electrical extension is prohibited when connecting the control box. • Make sure that the socket can be easily accessed at all times and is protected from rain or splashes. -
Page 11: I Control Box Functions
2.3 I Control box functions Example of a control panel (functions differ depending on the model) RA 67 - - iQ RA 63 - - iQ - Symbol Description RA 65 - - iQ RA 68 - - iQ Alpha 63 iQ Bio RA 69 - - iQ Control box: Starting/Stopping the appliance... -
Page 12: I Starting A Cleaning Cycle
2.4 I Starting a cleaning cycle In order to avoid any risk of injury or material damage, please follow the instructions below: • Bathing is prohibited when the appliance is in the pool. • Do not use the appliance during a shock chlorination. Wait until the chlorine level has reached the recommended value before immersing the cleaner. -
Page 13: I Meaning Of The Sensor Led (Depending On The Model)
2.5 I Meaning of the sensor LED (depending on the model) LED status Blue Green Orange "Lift System" or Steady Cleaning cycle activated "Spot Clean" function Filter full activated No current cycle or error Cycle in progress, pool Remote control function Flashing analysis, or finishing activated... - Page 14 2.6.2 Manually • Switch off the appliance by pressing • Bring the cleaner to the edge of the pool by gently pulling on the floating cable. • When possible, pick up the cleaner by the handle and lift it gently out of the pool so that the water it contains drains into the pool (see image...
-
Page 15: I Good Practices After Each Cleaning Operation
2.7 I Good practices after each cleaning operation 2.7.1 Clean the filter as soon as the appliance is out of the pool • The cleaner's performance may be reduced if the filter is full or dirty. • Clean the filter in clean water as soon as the appliance is removed form the pool after each cleaning cycle. -
Page 16: ❸ Using The Iaqualink™ App
❸ Using the iAquaLink™ app 3.1 I Operating principle Cleaner Mobile device Home Wi-Fi control box (smartphone or tablet) Cleaner network The iAquaLink™ app is available for iOS and Android systems. With the iAquaLink™ app, you can control the cleaner from any location at any time and have the benefit of advanced functions such as additional programming and troubleshooting assistance. - Page 17 Home Wi-Fi network • The LED flashes during the pairing process. • A message is displayed on the • Press the button on the screen confirm that • Select the home Wi-Fi network. ™ control box to enable Bluetooth ™ Bluetooth connection has been and start the pairing process.
-
Page 18: I Functions Available In The App
3.3 I Functions available in the app RA 67 - - iQ RA 63 - - iQ Symbol Description RA 65 - - iQ RA 68 - - iQ Alpha 63 iQ Bio RA 69 - - iQ Starting/Stopping the appliance "Lift System"... -
Page 19: I Control Using The App
3.4 I Control using the app Before controlling the cleaner with the app, you must: • Connect the control box to a power outlet, • Immerse the cleaner in the pool. 3.4.1 Programming and controlling cleaning cycles From the application: •... - Page 20 3.4.4 Error messages • If an error is detected, a warning symbol will be displayed Press the warning symbol to display the troubleshooting solutions, see § "5.2 I User alerts". Select Clear Error if you think you have solved the problem, or select OK if you want to leave the cleaner in error mode and troubleshoot the problem later.
-
Page 21: ❹ Maintenance
❹ Maintenance To avoid serious injury: • Disconnect the cleaner from the power supply. 4.1 I Cleaning the cleaner • The appliance must be cleaned regularly using clean or slightly soapy water. Do not use solvents. • Rinse the appliance thoroughly with clean water. •... -
Page 22: I Cleaning The Propeller
4.3 I Cleaning the propeller To avoid serious injury: • Disconnect the cleaner from the power supply. • Wear gloves when maintaining the propeller • Loosen the screw on the grid (see figure • Remove the grid (see figure • Remove the flow guide carefully (see figure •... -
Page 23: I Replacing The Brushes
4.4 I Replacing the brushes Are the brushes worn? • Replace the brushes if the wear indicators are similar to example Remove the worn brushes • Remove the tabs from the holes inside which they are fastened, then remove the brushes. Position the new brushes. -
Page 24: I Changing The Tyres
4.5 I Changing the tyres Remove the worn tyres Position the new tyres... -
Page 25: ❺ Troubleshooting
❺ Troubleshooting • If a problem occurs, before you contact your retailer, please carry out these few simple checks using the following tables. • If the problem is not resolved, contact your retailer. • : Actions to be performed by a qualified technician only. 5.1 I Appliance behaviour Part of the pool is not correctly •... -
Page 26: I User Alerts
5.2 I User alerts • The alerts are displayed both on the control box and in the iAquaLink™ app. • Follow the troubleshooting solutions suggested below; they can also be accessed in the iAquaLink™ app: press when an error code appears. Display on control box Flashing LED Display in the... - Page 27 Display on control box Display in the Flashing LED Solutions Error code iAquaLink™ app (depending on the (depending on model) the model) • Wait for the update to complete. Update in PrOG progress • Do not disconnect the control box. Very fast •...
-
Page 28: I Troubleshooting The Connection To The Iaqualink™ App
5.3 I Troubleshooting the connection to the iAquaLink™ app Control box status Possible causes Solutions • The control box is connected to the Contact your Internet service provider. router but not to the • Disconnect the home Wi-Fi router for 10 seconds. Re- cloud server (LAN connect it and see whether the LEDs come back on. - Page 29 Control box status Possible causes Solutions • The LED is lit and the "PROG" " message is displayed (depending on the • A software update is in • Wait for the update to complete. model). A message is progress. • Do not disconnect the power cable from the cleaner displayed in the app.
-
Page 30: I Updating Connected Cleaners
5.4 I Updating connected cleaners Connected cleaners can be updated with new developed functions or product improvements. Users cannot always see these improvements. The cleaner cannot be controlled by the app until the update has been installed. When an update is available (visible in the iAquaLink™ app, see image ) here are some recommendations before you press the start installation button: •... - Page 31 For more information, product registration and customer support: www.zodiac.com ©2020 Zodiac Pool Systems LLC. All rights reserved. ZODIAC® is a registered trademark of Zodiac International, S.A.S.U., used under license. All other trademarks are the property of their respec- tive owners.