M-system R3-NL1 Instruction Manual page 7

■ NodeObject FUNCTIONAL BLOCKS
TYPE
NETWORK
{Range}
VARIABLE
{Default}
nviRequest SNVT_obj_request
{Usable RQ
RQ_NORMAL
RQ_REPORT_MASK
RQ_UPDATE_STATUS}
nvoStatus
nvoFileDirectory SNVT_address
nvoCommErr SNVT_count
{0 through 65535}
{0}
nvoCardStatus SNVT_state
{0 or 1}
{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}
nvoCardErr SNVT_state
{0 or 1}
{0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}
TYPE
CONFIGURATION
{Range}
PROPERTY
{Default}
cpMaxSendTime SCPTmaxSendTime
{0.0 through 6653.4}
{10.0}
cpMinSendTime SCPTminSendTime
{0.0 through 6653.4}
{0.0}
EXPLANATIONS
Used for integration tools such as LonMaker.
Used for integration tools such as LonMaker.
• nviRequest RQ_NORMAL
0 is set at nvoStatus.
• nviRequest RQ_REPORT_MASK
report_mask bit is set at nvoStatus.
• nviRequest RQ_UPDATE_STATUE
0 is set at nvoStatus.
• 1 is set at invalid_id when any value other than the above three
types is set at nviRequest.
Used for integration tools such as LonMaker.
Counted in internal communication errors.
Reset to 0 after the count has reached 65535.
Indicates that I/O modules are mounted in each slot.
Bit 0 through bit 15 are applied for slot 1 through 16.
0: Not mounted
Indicates error status for each module/slot.
Bit 0 through bit 15 are applied for slot 1 through 16.
0: Normal
EXPLANATIONS
Sending time intervals of nvoVal [0 – 15]
Network variables are sent out in this time intervals even when
there is no change in input signals.
Minimum sending time intervals of nvoVal [0 – 15]
This minimum time intervals is maintained even when the input
signals changes faster than it.
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
1: Mounted
1: Error
R3-NL1
EM-8427 Rev.7 P. 7 / 9