Your Own Performance; Connecting A Microphone - Yamaha PSR-SX600 Owner's Manual

5
Microphone
– Sing Along with Song Playback or Your Own Performance –

Connecting a Microphone

1
Before turning on the power of the instrument, set the [MASTER
VOLUME] dial to the minimum position.
2
Connect the microphone to the [MIC INPUT] jack on rear panel,
and then turn on the power of the instrument and set the
[MASTER VOLUME] dial to the former position.
3
Call up the Mic Setting display.
[MIC SETTING] → TAB [E] Mixer
NEXT PAGE
By connecting a microphone to the [MIC INPUT] jack, you can
enjoy singing along with your keyboard performance or with
Song playback. The instrument outputs your vocals through the
built-in speakers. You add ambience and depth to your vocals by
using the DSP effects (e.g., Reverb and Chorus), as well as
correct the tone or timbre of the sound by using EQ.
Standard mono phone
plug (1/4")
NOTE
To avoid damage to the devices or to
the built-in speakers by an excessive
signal when connecting (or discon-
necting) the microphone, first set the
[MASTER VOLUME] dial to the mini-
mum position.
NOTE
Make sure you have a conventional
dynamic microphone.
PSR-SX600 Owner's Manual
5
77