Changing The Pitch Of The Keyboard - Yamaha PSR-SX600 Owner's Manual

Changing the Pitch of the Keyboard

Adjusting the Pitch in Semitones (Transpose)
The TRANSPOSE [-]/[+] buttons transpose the overall pitch of the instrument (the
keyboard sound, Style playback, Song playback, and so on) between -12 and 12 in
semitone steps. To instantly reset the transpose value to 0, press the [+] and [-]
buttons simultaneously.
Adjusting the Pitch in Octaves
The UPPER OCTAVE [-]/[+] buttons allow you to shift the pitch of the RIGHT 1
and 2 parts up or down by one octave (-1 – 0 – 1).
Fine tuning the Pitch
By default, the pitch of the entire instrument is set to 440.0 Hz according to equal
temperament. This basic tuning can be changed in the display called up via [MENU]
→ TAB [F] Menu2 → Cursor buttons [][][E][F] Master Tune/Scale Tune →
[ENTER]. The pitch can be shifted up or down between 414.8Hz and 466.8Hz in
approximately 0.2 Hz increments. For details, refer to the Reference Manual on the
website.
Transposing the pitch in the Voice Setting display
You can also make detailed pitch settings (octave and tune) for each of the keyboard parts in the Voice Setting display
called up via the following operations.
[MENU] → TAB [E] Menu1 → Cursor buttons [][][E][F] Voice Setting → [ENTER] → TAB [F] Tune
For more information, refer to the Reference Manual on the website.
NOTE
The Transpose functions do not affect
the Drum Kit or SFX Kit Voices.
PSR-SX600 Owner's Manual
1
39