To cancel the REC status of the channel, press the desired channel button.
4
While the following window is shown, use the Data dial or
[+/YES]/[-/NO] button to change the part assignment for the
channel to be recorded.
5
Start recording.
You can start recording by playing the keyboard, starting a Style, playing a
Multi Pad or pressing the SONG CONTROL [F/ K] (PLAY/PAUSE) button.
6
After you finish your performance, press the [
to stop recording.
A message may appear prompting you to save the recorded data. Press the
[EXIT] button to close the message.
7
F/ K
Press the [
performance.
8
Record your performance to another channel by repeating steps
3 to 6 above.
9
Save the recorded performance as a Song.
9-1
Press the [SONG FUNCTION] button to call up the Song Function Menu
display, and then press the [1 ] (Select) button to call up the Song
Selection display.
9-2
Save the recorded data as a file by following the instructions on page 26,
steps 1 – 5.
70
PSR-SX600 Owner's Manual
] (PLAY/PAUSE) button to play back the recorded
To cancel the recording, press the [J]
(STOP) button before going on to step
5.
J
] (STOP) button
The Style Retrigger function (page 41)
cannot be used when you are overdub-
bing to a recorded Song.
The recorded Song will be lost if
you change to another Song or
you turn the power off without
carrying out the Save operation.
NOTE
NOTE
NOTICE