Resetting To The Factory-Programmed Settings - Yamaha PSR-SX600 Owner's Manual

Other character-entry operations
• Deleting characters
Move the cursor to the character you wish to delete by using the Data dial, and press
the [7 ] (Delete) button. To delete all characters on the line at once, press and hold
the [7 ] (Delete) button.
• Entering marks or space
1. Press the [6 ] (Symbol) button to call up the mark list.
2. Use the Data dial to move the cursor to the desired mark or space, and then press
the [8 ] (OK) button.
• Selecting custom icons for files (shown at left of file name)
1. Press the [1 ] (Icon) button to call up the Icon Select display.
2. Select the icon by using the Cursor buttons [][][E][F] or Data dial. The
display includes several pages. Press the TAB [E][F] buttons to select the
desired pages.
3. Press the [8 ] (OK) button to apply the selected icon.

Resetting to the Factory-programmed Settings

While holding the right-most key (C6) on the keyboard, turn the power on. This resets
the settings of the entire instrument (referred to as the System Setup parameters) to their
factory default settings. Refer to the "Parameter Chart" in the Data List on the website for
details about which parameters belong to System Setup.
You can also reset specified settings to the factory default value or delete all files/folders in the User drive. Call up
the operation display: [MENU] → TAB [F] Menu2 → Cursor buttons [][][E][F] System → [ENTER] →
TAB [E][F] Reset. For details, refer to the Reference Manual on the website, Chapter 10.
32
PSR-SX600 Owner's Manual
C6
NOTE
To cancel the operation, press the
[8 ] (Cancel) button.
NOTE
The recorded Songs (page 68), Expan-
sion Packs (page 47), and other files
saved to this instrument are not reset
by this operation.