Yamaha PSR-SX600 Owner's Manual page 22

TAB [E][F] buttons
These buttons are used mainly to change the pages of displays that have "tabs" at the top.
[EXIT] button
Pressing the [EXIT] button returns to the previously indicated display.
Pressing the [EXIT] button several times returns to the default Main display
(page 18).
[1 ] – [8 ] buttons
The [1 ] – [8 ] buttons are used to make selections or adjust settings (up or down correspondingly) for
functions shown directly above them. The buttons above the numbers 1 – 8 are described as [] and those below
the numbers are described as [] throughout this manual.
For menus that appear in this section
of the display, use the [1 ] – [8 ]
buttons.
To reset the desired value to its default, press the [] buttons and the [] buttons simultaneously.
22
PSR-SX600 Owner's Manual
For list menus that appear, use the [1 ] –
[8 ] buttons to select the desired item.
For menus that appear in this sec-
tion of the display, use the [1 ] – [8
] buttons.
For parameters that appear in slider (or knob)
form, use the [1 ] – [8 ] buttons to
adjust the value.
To reset the desired parameter value to its
default, simultaneously press both the [] and
[] buttons below it.