Connecting A Foot Pedal (Foot Pedal Jacks) - Yamaha PSR-SX600 Owner's Manual

Connecting a Foot Pedal (FOOT PEDAL jacks)

The FC4A or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to one of the FOOT
PEDAL jacks. A footswitch can be used for switching functions on and off, while a foot controller controls
continuous parameters such as volume.
Foot Pedals
FC4A
By default, each jack features the following functions.
• FOOT PEDAL [1] .... Switches Sustain on or off. Connect an FC4A or FC5 foot-
• FOOT PEDAL [2] .... Switches Unison on or off. Connect an FC4A or FC5 foot-
You can also change the function assignments to the pedals as desired.
For information on functions that can be assigned to the pedals, refer to the
Reference Manual on the website.
• Example: Controlling Song Start/Stop by footswitch
Connect a footswitch (FC4A or FC5) to one of the FOOT PEDAL jacks.
To assign the function to the connected pedal, press the [1 ] (Song Play/Pause)
button in the operation display: [MENU] → TAB [E] Menu1 → Cursor buttons
[][][E][F] Controller → [ENTER] → TAB [F] Foot Pedal.
Advanced Features
Refer to the Reference Manual on the website, Chapter 9.
Assigning specific functions to each foot
pedal:
102
PSR-SX600 Owner's Manual
FC5 FC7
switch to this jack.
switch to this jack.
[MENU] → Menu1 → Controller → [ENTER] → Foot Pedal
NOTE
Do not connect or disconnect the
pedal when the power is on.