Connecting To A Computer ([Usb To Host] Terminal) - Yamaha PSR-SX600 Owner's Manual

Connecting to a Computer ([USB TO HOST] terminal)

By connecting a computer to the [USB TO HOST] terminal, you can transfer data
between the instrument and the computer via MIDI. For details on using a computer
with this instrument, refer to the "Computer-related Operations" on the website.
Transmitting/Receiving Audio Data (USB Audio Interface function)
By connecting a computer or a smart device to the [USB TO HOST] terminal via a
USB cable, digital audio data can be transmitted/received. This USB Audio Interface
function provides the following advantages:
Playing back audio data with high sound quality
This gives you direct, clear sound in which the sound quality has less noise and
deterioration than that from the [AUX IN] jack.
Recording your performance on the instrument as audio data by using
recording software or music production software
The recorded audio data can be played back on the computer or smart device.
Instrument
Instrument
USB cable
USB terminal
USB cable
USB cable
USB conversion
adaptor
NOTICE
Use an AB type USB cable of less
than 3 meters. USB 3.0 cables
cannot be used.
NOTE
• When using a USB cable to connect
the instrument to your computer,
make the connection directly without
passing through a USB hub.
• The instrument will begin transmis-
sion a short time after the USB con-
nection is made.
• For information on setting up your
sequence software, refer to the
owner's manual of the relevant soft-
ware.
NOTE
• When transmitting or receiving
audio signals by using a computer
running Windows, the Yamaha
Steinberg USB Driver should be
installed to the computer. For
details, refer to the "Computer-
related Operations" on the website.
• For instructions on connecting to a
smart device, refer to the "Smart
Device Connection Manual" on the
website.
Computer
Smart device
PSR-SX600 Owner's Manual
9
97