National Instruments 446 Series Calibration Procedure page 36

Call
DAQmxSetAOTermCfg
taskHandle:
myTaskHandle
channel:
dev1/ao0
data:
DAQmx_Val_PseudoDiff
NI-DAQmx Function Call
Call
DAQmxSetWriteRegenMode
with the following parameters:
taskHandle:
myTaskHandle
data:
DAQmx_Val_AllowRegen
NI 446X Calibration Procedure
NI-DAQmx Function Call (Continued)
with the following parameters:
LabVIEW Block Diagram
8. Modify the NI-DAQmx write property using the following function.
LabVIEW Block Diagram
36 ni.com