National Instruments 446 Series Calibration Procedure page 17

NI-DAQmx Function Call
Call
DAQmxCfgSampClkTiming
following parameters:
taskHandle:
myTaskHandle
source:
NULL
rate:
204800.0
activeEdge:
DAQmx_Val_Rising
sampleMode:
DAQmx_Val_FiniteSamps
sampsPerChanToAcquire:
NI-DAQmx Function Call
Call
DAQmxStartTask
parameters:
taskHandle:
myTaskHandle
© National Instruments Corporation
6. Configure the timing properties of the acquisition using the following
function.
with the
102400
7. Start the task using the following function.
with the following
LabVIEW Block Diagram
LabVIEW Block Diagram
17 NI 446X Calibration Procedure