National Instruments 446 Series Calibration Procedure page 35

NI-DAQmx Function Call
Call
DAQmxCreateAOVoltageChan
following parameters:
taskHandle:
myTaskHandle
physicalChannel:
dev1/ao0
nameToAssignToChannel:
minVal:
-10.0
maxVal:
10.0
units:
DAQmx_Val_Volts
customScaleName:
Call
DAQmxSetAOIdleOutputBehavior
taskHandle:
myTaskHandle
channel:
dev1/ao0
data:
DAQmx_Val_HighImpedance
Call
DAQmxSetAOGain
taskHandle:
myTaskHandle
channel:
dev1/ao0
data:
-40.0
© National Instruments Corporation
6. Create an AO Voltage channel through NI-DAQmx using the following
function.
with the
""
NULL
7. Modify the AO voltage channel property using the following function.
NI-DAQmx Function Call
with the following parameters:
LabVIEW Block Diagram
with the following parameters:
35 NI 446X Calibration Procedure