hajdu CUBE C50S Instructions For Installation And Use Manual page 38

C50S • C80S • C120S • C150S • C200S
8.9. Time/program setting
Time setting
1. If keylock is on, unlock keys by pressing and holding the
2. Select the time/program setting mode
3. set the hour using the
key.
4. set the minute using the
key.
Program setting
The program setting allows you to set the 3 enabled water heating periods within
one day. To ensure proper operation, you must set the clock of the unit.
Factory preset parameters:
Period 1 switch on time: 00:00
Period 1 switch of time: 23:59
(Periods 2 and 3 are disabled, and for these, switch on time (00:00) equals the set
switch of time.)
38
.
or key, and save your setting by touching the
or key, and save your setting by touching the
To set the switch on time for period P1,
proceed by touching the key
is displayed, the first decimal point is
flashing.)
Set the hour parameter of the period
switch on time using the
and save your setting by touching the
key.
Set the minute parameter of the period
switch on time using the
and save your setting by touching the
key.
Set the period switch of time in the same
way as the switch on time. (P1OF is displayed,
the first decimal point is flashing.)
key.
(P1On
or key,
or key,