Table of Contents
Advertisement
7 Line I/O connectors (minijack)
Allow you to make line connections to external audio
equipment. The upper connector is for input, and the
lower connector is for output.
Use a cable with stereo miniplugs to connect the
output connector to the AUX2 connector of the AV
I/O section.
8 USB connectors (USB, ×3)
Connect Control Panels. (USB cables are supplied
with each Control Panel.)
4 APG/PCI slot section
6 Graphics board
1 SDTI Interface Board
Installation of an SDTI Interface Board provides four
additional BNC connectors, enabling one SDTI input
channel and one SDTI output channel, plus one
reference signal input channel and one loop-through
reference signal output channel.
.........................................................................................................................................................................................
1) The boards supplied with your XPRI System will be
different depending on the model. For the DMW-S01NL
or DMW-S02NL, see page A-4. For the DMW-S05NL,
please refer to the attached list of accessories.
HD SDI
IN
HD SDI
OUT
REF IN
AGP
PCI1
PCI2
PCI3
5 HDTV Interface Board
1)
9 Network connector (modular jack)
Connect to a network with a 10BASE-T/100BASE-TX
network connector cable.
Caution
When using a network connector cable: For safety, do
not connect to the connector for peripheral device
wiring that might have excessive voltage.
REF
REF IN
IN B
OUT B
SDTI IN
IN A
SDTI OUT
OUT A
1 SDTI Interface Board
PCI4
PCI5
2 AV Processing Board
3 Realtime Video Processing Board/
SDTV Realtime Proscessing Board
4 Fibre Channel Interface Board (DMW-
STA001)/2Gb Fibre Channel Interface
Board
(LSI44929o)
2 AV Processing Board
Provides five BNC connectors, for two SDI inputs,
two SDI outputs, and a reference signal input.
Connect the individual connectors as follows:
• the OUT A connector to the SYSTEM I/F IN
connector of the AV I/O Block
• the IN A connector to the SYSTEM I/F OUT
connector of the AV I/O Block
• the IN B connector to a second VTR
• the REF connector to the VP REF OUT connector of
the AV I/O Block.
Chapter 2 Names and Functions of Parts
2-7
Advertisement
Table of Contents
Troubleshooting
