Wilo Yonos MAXO Series Installation And Operating Instructions Manual page 19

2.7 Improper use
The operational reliability of the supplied product is only guaran-
teed if used as intended and in accordance with section 4 of the in-
stallation and operating instructions. The limit values must on no
account fall below or exceed those values specified in the cata-
logue/data sheet.
3 Transport and temporary storage
3.1 Transport inspection
Check delivery immediately for damage and integrity. Where neces-
sary make a complaint immediately.
CAUTION
Damage due to incorrect handling during transport and
storage!
Protect the device from moisture, frost and mechanical damage
during transport and temporary storage.
3.2 Transport and storage conditions
ƒ
Store in original packaging.
ƒ
Protect against moisture and mechanical load.
ƒ
Permissible temperature range: -20 °C to +70 °C
ƒ
Relative humidity: maximum 95 %
Installation and operating instructions Wilo-Connect Modul Yonos MAXO
4 Intended use
ƒ
The Wilo-Connect module Yonos MAXO is designed for external
control and operating status signalling of Wilo pumps in the
series:
–
Wilo-Yonos MAXO (plus)
–
Wilo-Yonos MAXO-D
–
Wilo-Yonos MAXO-Z (plus)
DANGER
Risk of fatal electrical shock!
If used improperly, there is a risk of fatal injury due to
electric shock!
• Never use the control inputs for safety functions.
5 Product information
5.1 Type key
Example: Wilo-Connect module Yonos MAXO
Function interface
Connect module
= Suitable for this series
Yonos MAXO
5.2 Technical data
Instruction
Mains voltage
Terminal cross-section mains
terminals
en
Value
1~ 230 V +/-10 % 50/60 Hz
2 2
min. 1.5 mm , max. 2.5 mm
19