•
Check all fuel lines for tightness and wear on a
regular basis. Tighten or repair them as needed.
•
If the engine must be running to perform a
maintenance adjustment, keep hands, feet,
clothing, and any parts of the body away from the
cutting units, attachments, and any moving parts.
•
To ensure safety and accuracy, have an Authorized
Toro Distributor check the maximum engine speed
with a tachometer.
•
If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
•
Use only Toro-approved attachments and
replacement parts. The warranty may be voided if
used with unapproved attachments.
Sound Power Level
This unit has a guaranteed sound power level of 100
dBA, which includes an Uncertainty Value (K) of 1
dBA.
Sound power level was determined according to the
procedures outlined in ISO 11094.
Sound Pressure Level
This unit has a sound pressure level at the operator's
ear of 83 dBA, which includes an Uncertainty Value
(K) of 1 dBA.
Sound pressure level was determined according to
the procedures outlined in EN ISO 5395:2013.
Vibration Level
Hand-Arm
Measured vibration level for right hand =0.3 m/s
Measured vibration level for left hand =0.3 m/s
Uncertainty Value (K) = 0.16 m/s
Measured values were determined according to the
procedures outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.2 m/s
Uncertainty Value (K) = 0.1 m/s
Measured values were determined according to the
procedures outlined in EN ISO 5395:2013.
Engine-Emission
Certification
The engine in this machine is EPA Tier 4 Final and
EU Stage 3b compliant.
7
2
2
2
2
2