Page 1
DESCRIPTION: Assembly SG795 RIGA Instruction 3 DRAWER BEDSIDE TABLE FLOOR AREA 1.5 M x 1.5 M 1.00 hr 1 PERSON ASSEMBLY REQUIRED ASSEMBLY SPACE APPROXIMATE ASSEMBLY TIME REQUIRED ASSEMBLY TOOLS ASSEMBLED DIMENSIONS 400 mm 1/13 RIGA 23...
DESCRIPTION: Assembly RIGA Instruction 3 DRAWER BEDSIDE TABLE NO PART LIST PARTS LIST (1) LOWER TOP PANEL (2) PLINTH (3) LEFT SIDE PANEL (4) RIGHT SIDE PANEL (5) UPPER TOP PANEL (6) BACK PANEL (7) DRAWER FRONT (8) DRAWER BOTTOM (9) DRAWER BACK (9L) LEFT DRAWER SIDE (9R) RIGHT DRAWER SIDE...
DESCRIPTION: Assembly RIGA Instruction 3 DRAWER BEDSIDE TABLE HARDWARE LIST DO NOT MIX CONTENT OF HARDWARE BOXES ATTACH TO DRAWER ATTACH TO CARCASS 3x Left / 3x Right 8x28mm 15x12mm L=350mm 5x39mm GLUE DOWEL ROLLER RUNNER CAM LOCK CAM BOLT BAG 2 BAG 1 BAG 1...
Page 4
DESCRIPTION: Assembly RIGA Instruction 3 DRAWER BEDSIDE TABLE Top Tips before you start! Please check that all parts are present before you start the assembly of your furniture, as once assembled, the furniture is exempt from our home approval policy. For ease and speed of assembly, we recommend that before you commence each step of the assembly, that you identify all the parts required for that step.
Page 5
DESCRIPTION: Assembly RIGA Instruction 3 DRAWER BEDSIDE TABLE SCREW IN CAM SCREWS PRESS IN CAM LOCKS. ARROW ON CAM ONLY DOWN TO FIRST RING. LOCK MUST FACE HOLE IN PANEL EDGE. FLUSH WITH DO NOT INSERT DOWELS PANEL IN CAM SCREW / LOCK HOLES. TO SECURE PANELS, PRESS PANELS TOGETHER ALIGNING TURN CAM LOCKS 1/2 TURN CLOCKWISE.
Page 6
DESCRIPTION: Assembly RIGA Instruction 3 DRAWER BEDSIDE TABLE ASSEMBLY INSTRUCTION FOR DRAWER SLIDE A&B 350mm SPECIAL TIPS FOR DRAWER SLIDE A FRONT BACK SECOND HOLE SECOND HOLE LAST SECOND HOLE 3,5x13mm 6,0x11mm 6,0x11mm ATTENTION ! Make sure second hole of drawer slide A is put on first front hole of panel.