A041 - Bar Feeder In Simulation Cycle - LNS HYDROBAR SPRINT 555 Troubleshooting And Spare Parts Manual

Chapter 1: Alarms
A041 – Bar Feeder in Simulation Cycle
ATTENTION!
BAR FEEDER IN
SIMULATION CYCLE!
BAR STOCK IS PRESENT
IN THE BAR FEEDER.
OPERATION ERROR!
EXIT SIMULATION MODE
Description:
The Bar Feeder in Simulation Cycle alarm occurs when the bar feed detects a bar in the guiding channel while operating in simulation
mode.
Solution:
Exit the simulation operation if production is to be run, or remove the material from the guiding channel and any material on the chain
magazine rack before restarting the simulation cycle.
A041
1 - 1 9
HYDROBAR SPRINT 555