Store And Retrieve Settings; Figure 21: Configuration - Username/Password Modification Screen - ABB AWIN GW100 User Manual

CO NFIG U R AT IO N
6.14

Store and Retrieve Settings

The Configuration > Store Retrieve Settings screen provides the following options:
– Factory Default – it can load the factory default parameters. To do so, select Set Factory
Defaults.
– Upload Configuration to device – it can download the configuration to the gateway from
a previously saved file. User must "Choose" the Config file, add "Passphrase", and click
"Send Configuration to Device".
– Send Configuration to File – it can export gateway's existing configuration to a PC's hard
drive. A "Passphrase" is required.
– Export As-Built Configuration - it can export gateway's existing configuration in text for-
mat. It will only export configuration of connected devices.
A 10-character passphrase is required to protect/validate the file before it can be
saved or retrieved from a PC. It prevents unauthorized users from applying the sys-
tem configuration file to an unauthorized access point to gain access to the net-
work. Always record this passphrase when saving a configuration file. It will need to
be re-entered each time that specific configuration file is uploaded to the AWIN
GW100.
3BN P 102 9 12 C

Figure 21: Configuration - Username/Password Modification screen

In this case, IP address is not restored to factory default. It remains as-is. How-
ever, if you want to also reset IP address, you can use hard reset option.
STOR E A ND R E TR I EV E S ET TI NG S
43