MOD BU S MA P
In the Modbus TCP Port field, enter the Ethernet port number. The default is 502. Click
Submit to save changes. The device must be rebooted for the changes to take effect.
User can also export the Modbus map as-is currently configured in the gateway using the Ex-
port Mappings button on this page.
6.12
Modbus Map
Click Configuration > MODBUS > MODBUS Mapping in the left navigation column to show
the current Modbus map.
6.13
Passwords
There are administrator password and monitor password. The administrator can make
changes to the configuration, whereas a monitor can only view information.
To change or set passwords, click Configuration > Username/Passwords in the left naviga-
tion column. Passwords must be 10 characters long.
42
Figure 20: Modbus Mapping screen
CO NFIG U R AT IO N
3BN P 102 9 12 C