Delete A Device; Edit Slave Device - ABB AWIN GW100 User Manual

V IEW D EV IC E S
Field
TV
QV
Battery Life
Neighbors
Timestamp
Latency
Bandwidth
Joins
Command 3 period
Command 3 status
Active Pipe
Fast Pipe Control
6.7.1

Delete a Device

To remove a device from the list (i.e. WirelessHART network), right-click on the disconnected
device in Devices page and a delete option will appear. Select this option to confirm.
6.7.2

Edit Slave Device

To edit a slave device, click Edit Slave IDs button and enter the new ID number in the field
next to each device. When finished, click OK button to save the changes, or click Cancel but-
ton to discard changes.
It may take a few seconds for the new ID numbers to take effect.
38
Description
Displays the Tertiary Value of the corresponding HART device.
Displays the Quaternary Value of the corresponding HART device.
Displays the expected remaining life of the battery powering the devices
(if "65535" is displayed, the device is line powered with a power supply or
waiting for battery life information to be provided by the device).
The number of neighbors a WirelessHART device can communicate with.
In (hh:mm) format, is the time when the data was most recently polled.
Measure of time it takes to respond and update all the corresponding
data fields (measured in seconds).
In (msec/packet) format, is the available data rate to the corresponding
device.
The number of times a device connected to the gateway since bootup.
HART command 3 continuous burst period.
HART command 3 burst status (ON/OFF).
This field shows the status of pipe for a device.
Note. The Active Pipe option is available in firmware version 1.5-1.
Fast pipe can be enabled and disable for a device using this function.
Notes:
Only one device can have a pipe at any point in time.
The Fast Pipe Control option is available in firmware version 1.5-1.
Only devices that are not connected may be deleted from the device list.
To delete an active device, power down the device and wait until the status col-
umn indicates the device is disconnected and the row is red.
CO NFIG U R AT IO N
3BN P 102 9 12 C