Channel Blacklist; View Devices; Figure 15: Device Information Screen; Table 11: Frequency Of Each Channel Of Network - ABB AWIN GW100 User Manual

V IEW D EV IC E S
After entering all the MAC addresses and corresponding Join Keys, reboot the gateway and
allow approximately 30 minutes to 1 hour for the network to form.
6.6.2

Channel Blacklist

Channel blacklisting is a way of limiting the number of channels used in a network. When
channels are blacklisted, they are not used in the network.
Although the network may operate on as few as five channels, it is recommended that the
network run on as many channels as possible for more overall available bandwidth. Note that
the number of usable channels must be an odd number.
To blacklist a channel, enter the frequency of the Channel Blacklist field. The channel must be
blacklisted in pairs.
Channel No.
1
2
3
4
5
6
7
8
6.7

View Devices

Click Configuration > WirelessHART > Devices in the left navigation column to view the num-
ber of devices in the WirelessHART network.
The device information page displays data about the devices in the WirelessHART network.
The Device ID is used for addressing the device via Modbus TCP. Devices connected to Wire-
lessHART adapters appear below the adapter and do not have a MAC address.
36
Table 11 lists the frequency of each channel.

Table 11: Frequency of each channel of Network

Frequencies
2405
2410
2415
2420
2425
2430
2435
2440

Figure 15: Device Information screen

Channel No.
9
10
11
12
13
14
15
CO NFIG U R AT IO N
Frequencies
2445
2450
2455
2460
2465
2470
2475
3BN P 102 9 12 C