Advertisement
4. Place the Automatic Document Feeder in posi-
tion.
Note:
When installing the Automatic Document Feeder,
hold onto the upper and lower ends of the Auto-
matic Document Feeder in the vertical position as
shown on the left.
5. Using the two mounting screws furnished with
the Automatic Document Feeder, tighten the
hinges to secure the Automatic Document
Feeder in position.
Note:
Check that the shoulder screws are fully tight-
ened.
6. Remove the plastic bag of the hookup cable.
7. Connect the hookup cable to the machine.
III. Adjusting the Document Feeding Tray
Width
1. Plug the power cord into the power outlet and
turn on the machine.
2. Widen the width across the edge guides by slid-
ing them to their maximum width.
C4652U012AA
3. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the Service Manual.)
4. Touch "ADF."
5. Touch "Original Tray Width."
4582U001AD
4582U018AA
E-2
4582U013AA
4037IXE295DA
4582IXE508DA
Advertisement
