View Of Y- Axis Home Block With Kynar Thumbscrews; Z-Drive Removed From Arm Assembly - CETAC ASX-520 Upgrading And Servicing Manual

Firmware on the ASX-520 and ASX-520HS Autosamplers with an EXR-8
Guide for Upgrading the
Figure 1-2. View of Y- axis home block with Kynar thumbscrews.
Figure 1-3. Z-drive removed from arm assembly.
3. Remove the whole Z-drive assembly from the arm by pulling the whole Z-drive assembly
forward and off the autosampler arm (Figure 1-3).
3