Assembling The Cart; Removing The Head Assembly From The Base Of The Autosampler; Autosampler On Its Side - CETAC ASX-520 Upgrading And Servicing Manual

Guide to Installing the EXR-8 with a CETAC Autosampler

Assembling the Cart

The Cart should be assembled using the instructions provided with the Cart. The Cart should
have two holes on the top layer (Figure 1).
Figure 1. Cart from above.

Removing the head assembly from the base of the autosampler

1. Unplug the autosampler.
2. Remove all sample vials and the tray.
Figure 2. Autosampler on its side
3. Place the autosampler on its side (Figure 2).
4. Remove the contents from Bag A and locate the hex wrench (Figures 3 and 4).
Figure 3. Contents of Bag A.
2