General Operation; Powering On/Off; Switching The System To Clock Mode; Setting The Clock Automatically - Hitachi AXM139E Instruction Manual

General Operation

Powering ON/OFF

• Press the Standby button to switch the unit on. The word "HELLO" will scroll across
the display.
• Press the Standby button again to switch the unit to standby mode. The word
GB
"ECOPOWER" will scroll across the display .

Switching the system to Clock Mode

When the unit is in ON or STANDBY mode, press the CLOCK button on the unit or remote
control to display the clock on the display
• If the unit is idle for more than 90 seconds in clock mode, it will automatically switch to
ECO-Power mode.
• If the unit is idle for more than 15 minutes in normal mode, it will automatically switch to
ECO-Power mode.

Setting the Clock Automatically

When the DAB or RDS station displays the time, press and hold INFO button on the remote
control, the clock will automatically sync time of RDS. [AUTO SYNC] will show on the
display.

Setting the Clock Manually

1. In CLOCK mode, press and hold CLOCK button for over 2 seconds to activate the clock
setting mode. [CLOCK SET] scrolls on the display, and the [CLOCK 24] (24-hours time
format) appears.
2. Press
CLOCK button to confirm. The hour digits begin to blink.
3. Press
4. Press CLOCK button to confirm. The minute digits begin to blink.
5. Press
6. Press CLOCK button to confirm.
• The clock must be set in clock mode and if the set-up time for each step is longer
than 90 seconds, set-up will be cancelled.
• If your unit is disconnected from the mains supply the clock setting will be lost.
20
/
button on the front panel to select 12/24 mode (time format). Press
/
button on the front panel to set the hour.
/
button on the main unit to set the minutes.