Usb Operation - Hitachi AXM139E Instruction Manual

USB Operation

By connecting an USB mass storage device (including USB flash memory, USB flash players
or memory cards) to this unit, you can enjoy the device's stored music through the unit.
1. Insert the USB device's USB plug into the
socket on the front of unit.
Press the CD/USB button on remote control
2.
GB
or rotate the SOURCE select button on the
amplifier to select the USB function. The word
"USB" will be displayed on the front panel.
3. The device's stored music will be played
automatically.
4. When you store more than one folder in
the USB flash, use the ALBUM UP button or
ALBUM DOWN button on the remote control
to select the next/previous folder. Then
choose the track with the
play the folder.
5. The player support the USB music file format
of MP3, WMA only.
For devices with USB Cables:
1. Insert one plug of the USB cable (not supplied) to the
2. Insert the other plug of the USB cable to the USB output terminal of the USB device.
For memory Cards:
1. Insert the memory card into a card reader (not supplied).
2. Use a USB cable (not supplied) to connect the card reader into the
unit.
USB Storage Device Data Protection
• Always insert the USB device in the correct direction. Failure to do so may result in
damage to the USB device and this unit.
• Do not remove the USB device while it is being accessed.
• Electrical interference and electrostatic discharges may cause the USB device to
malfunction and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against
corruption, data loss or device malfunction. Please note that our company shall not accept
any liability for damage or loss of stored data.
USB connection is not compatible with all hard drive models.
30
/
button to
socket on the unit.
socket on the